Kawasaki KRX and KRX4 1000, Ridge, Teryx H2 Clutch Puller Tools

NOTE: The 2025 KRX models have a new bolt pattern on the primary clutch switching from a 4 arm clutch to a 3 arm clutch. The 2024+ Kawasaki Ridge and Teryx H2 share this new 3 arm clutch but the difference is in the bolt size holding the primary cover on. Please select your model year from the options. Thank you Full Access UTV

MADE IN THE USA!!!!!!

Taking off the primary clutch or secondary clutch on the KRX 1000 is a chore that usually requires 2 people and some nerves. With the Full Access UTV clutch tools kit you can make it a one person task. Our kit locks the primary or secondary clutch so you can remove or install without the fear of breaking the clutch, reverse pin, timing chain, or your knuckles.

This kit also makes belt changes much simpler.

INCLUDES: 

1- Primary clutch puller and installer tool with 3 longer bolts for 2020 - 2024 KRX models or 4 longer bolts for the 2025+ KRX models. The new primary clutch tool works with all Ridge models and all Teryx H2 models

1- Secondary clutch puller and installer tool.

-Our clutch puller bolts are required to lock the tool to the secondary clutch, or use something similar.

They can be found by clicking ***HERE***


-These are the same as in the KRX 1000 factory service manual.

Kawasaki Primary tool # 57001-1620

Kawasaki secondary tool # 57001-1918

TORQUE:

Primary bolt torque is 170 ft lbs

Secondary bolt torque is 100 ft lbs. (left hand thread)

DEMO VIDEO:

Notes updated to 3/16" secondary 3/14/23